Wet‑press molded pulp electronic box insert

Fibre moulée par pressage humide	Fibre moulée par pressage à sec	Pâte ondulée / Pâte de bois
Matériau : Papier recyclé/pâte à papier	Fibre de canne à sucre, fibre de bambou	Pâte à papier ondulée, pâte de bois
Durabilité : Recyclable, biodégradable et compostable	Biodégradable et compostable	Recyclable
Surface: One side smooth, other side with light texture	Un côté lisse, un côté avec texture	Surface rugueuse
Color: Grey, White, Natural, Black, Pantone custom	Blanc, Naturel, Noir, Pantone	Naturel, noir, blanc
Logo : Gaufrage, débossage, impression	Gaufrage, débossage, impression	Gaufrage, débossage, impression
Thickness: 0.8–1.5 mm (electronics grade)	0,7-1,2 mm	1,5-3,0 mm
Performance : Excellente	Superbe	Bon
Amortissement : Excellentes vibrations et amortissement	Superbe	Bon
Protection : Support géométrique, rayons anti-rayures	Géométrie	Géométrie
Expédition et stockage : Emboîtable, faible coût d'expédition et de stockage	Empilable, peu coûteux	Empilable, coût plus élevé
Statique : Statique neutre	Neutre statique	Neutre statique

Fibre moulée par pressage humide

Fibre moulée par pressage à sec

Pâte ondulée / Pâte de bois

Matériau : Papier recyclé/pâte à papier

Fibre de canne à sucre, fibre de bambou

Pâte à papier ondulée, pâte de bois

Durabilité : Recyclable, biodégradable et compostable

Biodégradable et compostable

Recyclable

Surface: One side smooth, other side with light texture

Un côté lisse, un côté avec texture

Surface rugueuse

Color: Grey, White, Natural, Black, Pantone custom

Blanc, Naturel, Noir, Pantone

Naturel, noir, blanc

Logo : Gaufrage, débossage, impression

Gaufrage, débossage, impression

Thickness: 0.8–1.5 mm (electronics grade)

0,7-1,2 mm

1,5-3,0 mm

Performance : Excellente

Superbe

Bon

Amortissement : Excellentes vibrations et amortissement

Superbe

Bon

Protection : Support géométrique, rayons anti-rayures

Géométrie

Expédition et stockage : Emboîtable, faible coût d'expédition et de stockage

Empilable, peu coûteux

Empilable, coût plus élevé

Statique : Statique neutre

Neutre statique

6 Egg Trays FAQs

6 egg trays faqs

How far in advance should I order for a seasonal deadline?

Further than most buyers expect, and the reason is approval rather than production. Shade approval on a custom color, artwork proofing on a printed run, and sea freight transit all sit ahead of the date you need cartons in hand. Seasonal orders that fail almost always fail on the approval cycle rather than on manufacturing.
How far in advance should I order for a seasonal deadline?

Further than most buyers expect, and the reason is approval rather than production. Shade approval on a custom color, artwork proofing on a printed run, and sea freight transit all sit ahead of the date you need cartons in hand. Seasonal orders that fail almost always fail on the approval cycle rather than on manufacturing.
Do these cartons meet food contact requirements?

Eggs sit inside their own shell, so egg cartons are generally treated as secondary rather than direct food contact packaging in most jurisdictions. Requirements still vary by market, particularly in the EU, and buyers should confirm what applies where they sell. We supply material declarations on request so your compliance team can assess it against local rules.
Can I order more than one cell count in a single shipment?

Yes, and most buyers do. Mixed loads are quoted per line and consolidated into one container, which is usually cheaper than separate shipments. What changes is production scheduling, since each mold runs separately, so a mixed order can carry a slightly longer lead time than a single format at the same total volume.
What is the difference between a molded pulp egg carton and a molded fiber one?

Nothing meaningful. The two terms describe the same process and the same material, and buyers use them interchangeably by region and by industry. Molded fiber is more common in electronics and industrial packaging, molded pulp more common in food and agriculture. Both refer to fiber drawn onto a mold under vacuum and pressed to shape.

Conception et personnalisation

Send CAD or product samples and we design a cavity layout to your exact device geometry.
Options: finger‑notches for easy lift, cable channels, accessory pockets, clip posts, and multi‑layer kits (top device, bottom accessories).
Keep a common outer footprint with interchangeable inner trays to cover multiple SKUs while using the same outer box.

Performances et essais

Typical thickness 0.8–1.5 mm for electronics trays; reinforced ribs available for heavier components.
Static‑neutral, low‑lint material suits sensitive electronics.
We provide guidance for ISTA‑style drop, vibration and compression tests and tune geometry to pass target protocols.

Matériaux et durabilité

Recycled paper and agricultural fibers (bagasse) form a mono‑material solution that simplifies recycling.
Water‑based pigments enable grey, white, black or brand‑matched colors without plastic films.
FSC options and sustainability data sheets available on request.

Échantillonnage et délais

Examen de la DFM et proposition de mise en page en quelques jours.
Moule d'échantillonnage + échantillons : environ 10 jours.
Production en série : généralement 15 à 25 jours après approbation.
MOQ : 5000 pcs par dessin/couleur.

Emballage et livraison

Trays nest tightly in master cartons; pallets optimized for export to reduce freight and emissions.
Shipping terms EXW/FOB/CIF available with export documentation.

FAQ

Q1: Can you match our device shape exactly?
A: Yes. Provide CAD or physical samples and we’ll design precise cavities for a no‑rattle, scratch‑safe fit.

Q2 : Quelles sont les couleurs disponibles ?
A: Natural grey, white, black and any Pantone custom using water‑based pigments.

Q3: Are the trays waterproof?
A: Standard trays are fiber‑based; optional water‑resistant coating or liner can be added for high‑humidity routes.

Q4: What thickness should we choose?
A: 0.8–1.5 mm is common for electronics. We’ll recommend wall thickness and ribs based on weight and drop‑test needs.

Q5: Can we emboss our logo?
A: Absolutely. Embossed/debossed logos and functional pictograms (cable, charger, manual) can be molded into the tray.

Q6: Are they recyclable and compostable?
A: Yes. They are paper‑fiber based, recyclable in most paper streams and biodegradable/compostable under proper conditions.

Q7: What information do you need to start?
A: Device dimensions/CAD, carton size, desired layout, color and logo files, target quantity and timeline.

Ready to build a premium, plastic‑free electronics insert?
Share your specs and branding. We’ll design the cavity, sample fast and deliver on time with BonitoPak PM‑212.

Autres catégories

Machines à mouler la pâte à papier

Blogs

Installations

A propos de nous

Base de connaissances

Études de cas

Observer et apprendre

Wet‑press molded pulp electronic box insert

Moule public

Solutions d'emballage

Conception en 3D

Moule personnalisé

Description du produit

Galerie de Wet‑press molded pulp electronic box insert pièces

40%

Gain de temps et d'argent

50%

Plus durable

25%

Augmentation des ventes

100%

Plus fiable

Matériaux pour Wet‑press molded pulp electronic box insert Pièces détachées

Personnalisé Écologique Fiable

Excellence en matière d'emballage personnalisé et respectueux de l'environnement

Entièrement personnalisable

Soutien des experts

Solutions écologiques

Assurance qualité

6 Egg Trays FAQs

6 egg trays faqs

Biodégradable Résultat

0 jours

7 jours

14 jours

30 jours

Industries spécialisées

Solutions d'emballage OEM et ODM

Services OEM

Services ODM

Prêt à élever votre projet ?

Donnez vie à vos dessins avec BonitoPak

Nos catégories de produits

FAQ

Articles et réflexions connexes

Remplir ce formulaire détaillé